Plastic Scrap – Lumps Grinder

FEATURES:-

  • Rugged construction: Heavy duty chamber having rotor of liberal dimensions with segmental cutter elements. Rotor operates on liberalsized bearings to take high thrust and axial loads. Rotor is driven through high torque, low speed gear box and electric motor.
  • Hopper: Large hopper of heavy gauge, ribbed steel sheet, is fitted.
  • Screen Mesh: Changeable, steel plate mesh of one size provided.
  • Blades: Blades are made from AISI D2 material, and hardened. The blade segments are arranged on a central shaft in a staggered manner to give staggered cuts to the lumps for easy cutting.
  • Pusher: Hydraulic pusher unit is provided to push the plastic lumps and articles against the cutting rotor blades.
  • Operation: Low noise, low dust, easy to operate machine. Very cost effective operation, gives high output at good returns.
  • Electrical: Control panel to put cutter motor and hydraulic unit motor on/off, lamps, manual push button and automatic controls with facility for manual and auto reverse to clear jammed material is provided.
  • Models Available: LMP-100 LMP-300

 

Click on the image to download the PDF

Description

MALIKSONS Model LMP-PLASTIC SCRAP – LUMPS GRINDER units are made for the special shredding of high weight and high volume ,plastic material scrap of large applicance shells, vehicle guards, vehicle door panels, drums, carbuoys, bottles, lumps of hard and soft plastic.

Material is fed manually through the hopper in front of a hydraulically operated pusher. The pusher pushes the material onto the constantly rotating rotor and cutting knives. This causes the cutting knives to tear the material by cutting, pulling and squeezing action, which shreds the material to smaller size. The large shredding chamber and loading hopper size, combined with the horizontal pusher, ensures optimum feeding of the material to the rotor, to achieve the most efficient performance.

The output screen has holes with different diameters. This determines the size of the final clippings and shreds which come out of the machine. Depending on the type and size of shreds desired, it may be required to change the output screen or cause a repass of the material for a second time. The shreds can then be ground for reducing to smaller size or the shreds can be directly baled for storage/transport.